B-Team Corrosion Protection RO Ro   EN En   FR Fr   DE De   IT It   ES Es

Corrosion protection and rust prevention for a maritime oil jetty

                                     Application of the coating  rust prevention

Jurong Island / Singapore: Artificial Jurong Island is a chemical energy center in Singapore.

Nearly 100 companies amongst these was the top companies in the petroleum and chemical products.

Jurong Island has a modern infrastructure. Along with power stations, refineries are found, pipe networks over large distances, fire stations and hospitals.

Refiners processed into fuel  of 1.3 million barrels of oil per day, and special chemicals. Singapore ranks in the top three worldwide in refining oil, even when they do not have their own resources.

 Application of the coating  rust prevention

Project: wharf area of maritime oil sump

Application Engineering PTE Ltd. EBT

Area: 100 m²

Beneficiary: Stepan Asia Pte. Ltd.

Environment: biodiesel, methyl ester and glycerol (cocos nucifera)

Ceramic Polymer commercial partner in Singapore: SEIKA Corporation, Singapore

 

Durable concrete protection with "Proguard CN-1M"
 

·  Apply the product directly, without the need to apply a primer

· Excellent chemical resistance (eg.: Against extreme chemical attack, more than 9000 hours of storage in 98% H2SO4 / methanol pure / 3% NaCl solution, 1/3 each at a temperature of 50 ° C)

· Extreme adhesion to concrete substrate

· Skid by adding quartz sand

  Application of the coating  rust prevention  Application of the coating  rust prevention

 

 Application of the coating     
 

·  Concrete preparation (cleaning, grit blasting SA 2.5, dust extraction, the residual moisture should be less than 6%)

· Product Application 1. ProGuard CN-1M- black coat with a thickness of 500 micrometres conventional roll

· The surface was applied quartz sand (particle size approx. 1 mm)

· The following day, non-adhesive layer of sand was removed from the surface

· Product Application 1M- 2. ProGuard CN-gray coat with a thickness of 500 micrometre

· Cure time lasts one day and is very resistant surface

· They were subsequently applied yellow markings