B-Team Corrosion Protection RO Ro   EN En   FR Fr   DE De   IT It   ES Es

Synthetic resins - Remacoat

Are particularly distinguished by excellent resistance to abrasion and wear, as well as broad chemical resistance. The extremely short curing times allow dramatic reduction of installation downtimes.  REMACOAT is suitable for the coating of steel, concrete, light metal, plastics and many other materials.

REMACOAT is insensitive to moisture, cures even at very low temperatures and is relatively insensitive to ambient conditions.

 

REMACOAT A-60

 
Polymer / Filler / Reinforcing: Diphenylmethane-diisocyanate (isomers and homologues) / Mixture of polyoxyalkylamines
Continuous use temperature: 40° C wet / -40° C...+130° C (short-term 150° C) dry
Applications/ Miscellaneous: Excellent resistance to weather under high ozone concentrations and under dynamic burdening.

 

REMACOAT A-70 S

 
Polymer / Filler / Reinforcing: Diphenylmethane-diisocyanate (isomers and homologues) / Mixture of polyoxyalkylamines
Continuous use temperature: 40° C wet / -40° C...+130° C (short-term 150° C) dry
Applications / Miscellaneous:
Comparable to REMACOAT A-80 but with natural flowing properties, smooth surface, higher impact resistance.

 

REMACOAT A-80

 
Polymer / Filler / Reinforcing: Diphenylmethane-diisocyanate (isomers and homologues) / Mixture of polyoxyalkylamines
Continuous use temperature:
40° C wet / -40° C...+130° C (short-term 150° C) dry
Applications / Miscellaneous: 
 
High mechanical strength and optimal sliding and wet abrasion resistance.

 

REMACOAT D-40

 
Polymer / Filler / Reinforcing: Diphenylmethane-diisocyanate (isomers and homologues) / Mixture of polyoxyalkylamines 
Chemically resistant against:
Dilute acids (inorganic and organic) and alkalis, diverse types of oil and aqueous phases at 50° C (wet).
Continuous use temperature:
50° C wet / -40° C...+130° C (short-term 150° C) dry
Applications / Miscellaneous: 
DIBt approved (Z-59.12-305) as organic surface protection for concrete acc. to 19 L of the German water ecology act. Particularly suitable for wastewater systems and LAU (storing, filling, handling) installations.
 

 

REMACOAT D-40 S

 
Polymer / Filler / Reinforcing: Diphenylmethane-diisocyanate (isomers and homologues) / Mixture of polyoxyalkylamines
Chemically resistant against: 
Dilute acids (inorganic and organic) and alkalis, diverse types of oil and aqueous phases at 50° C (wet).
Continuous use temperature: 50° C wet / -40° C...+130° C (short-term 150ˇ C) dry 
Applications / Miscellaneous:
Natural flowing properties, optimal large-area layer thickness levelling, smooth surface.

 

REMACOAT C

 
Polymer / Filler / Reinforcing: Diphenylmethane-diisocyanate (isomers and homologues) / Mixture of polyoxyalkylamines 
 
Chemically resistant against: 
Numerous chemicals, in particular petrol, aviation fuel, light fuel oil and internal combustion engine oils.
Continuous use temperature:
45° C wet / -40° C...+130° C (short-term 150° C) dry
Applications / Miscellaneous: 
DIBt approved (Z-59.12-304) as an electrically dischargeable, organic surface protection for concrete acc. to 19 I of the German water ecology act, for coating LAU (storing, filling, handling) installations for combustible liquids (AI, AII and B) to avoid ignition following electrostatic charging.
 

 

REMACOAT FDA

 
Polymer / Filler / Reinforcing: HDI-Isocyanate / Mixture of polyoxyalkylamines 
Chemically resistant against:  Salt solutions and dilute, non-oxidising acids and alkalis at temperatures of +45-50° C (wet).
Continuous use temperature:
45-50° C wet / -40° C...+100° C (short-term 130° C) dry
Applications / Miscellaneous:  Light-fast, colour-fast cover coating, also suitable for contact with dry foods.

 

REMACOAT FR

 
Polymer / Filler / Reinforcing: Diphenylmethane-diisocyanate (isomers and homologues) / Mixture of polyoxyalkylamines 
Chemically resistant against:
Dilute acids (inorganic and organic) and alkalis, various types of oil, as well as aqueous phases at 50° C (wet).
Continuous use temperature: 50° C wet / -40° C...+130° C (short-term 150° C) dry
Applications / Miscellaneous:
The special formulation of REMACOAT FR enables it to fulfil the requirements of ÖNORM B 3800 Parts 1 and 2 for flame retardant B1, drop formation Tr1 and smoke intensity Q1. The classification B1 makes REMACOAT FR especially suitable as flame retardant surface protection in the construction industry.

 

Request additional details